Accessories

Snubber is intended to suppress the effect of sudden pressure pulses and fluctuation of pressure peak. It is provided with adjustable needle screw to restrict the flow as per operating condition to enhance service life of a pressure instrument.

Needle Valves are intended to isolate the pressure instrument from pressure medium or to throttle and to damp pressure pulses. These are available with a variety of end connections with female ends and male-female ends.

Gauge Cocks are economical to isolate pressure instrument from process fluid. Available in 2-Way as well as 3-Way. 2-Way provides isolation of the instrument and 3-Way has an additional provision of drain (Vent).

Gauge Savers are intended to protect pressure instrument against the effect of pressure that exceeds the maximum pressure rating of an pressure instrument.

Siphons are intended to protect pressure instrument from the effect of high temperature pressure medium such as steam etc. and also to reduce the effect of pressure surge. The hot medium condensate inside the coil of siphon tube and prevent the direct contact.

These Manifolds provides direct mounting features with isolation, drain and calibration in a single unit. These types of manifolds can be directly mounted on static pressure instruments to eliminate several parts and joints.

These Manifolds are generally used in differential pressure application with DP Gauges, Switches & Transmitters. These are provided with two isolation and one equalising valve

These Manifolds are having two isolations, one equalizer & two drain/ calibration valves.

These are intended to compare the reading of pressure instrument against Master / Test Pressure instrument by pressure balancing method. Available in different ranges with or without pressure priming pump.

These are intended to compare the reading of pressure / Vacuum of instrument against Master /Test Pressure instrument by pressure or Vacuum balancing method.

These are intended to compare the reading of pressure of instrument against Master pressure instrument and are very light weight and handy to calibrate on site instruments.

These are intended to compare the reading of pressure / Vacuum of instrument against Master instrument and are very light weight and handy to calibrate on site instruments.